Maintenance of Plate and Tube Laser Cutting Machine

Use and maintenance methods of Plate and Tube Laser Cutting Machine:

1. Check the steel belt frequently to ensure that it is tight. Otherwise, if there is a problem in operation, it may hurt people, or even cause death in serious cases.

2. Check the straightness of the track and the verticality of the machine every six months, and if it is found to be abnormal, it will be maintained and debugged in time. If this is not done, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected.

3. Use a vacuum cleaner to suck up the dust and dirt in the machine once a week, and all electrical cabinets should be closed tightly to prevent dust.

4. The guide rails of the Plate and Tube Laser Cutting Machine should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The machine can move better and cut more accurately, and the quality of the cut products will be improved. .

5. The dual-focus laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head.

6. If the Plate and Tube Laser Cutting Machine is deformed or other forms appear, at this time you should know that the laser cutting head is a bit damaged and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency.