Daily maintenance of 1000w handheld fiber laser welding machine

Daily maintenance of 1000w handheld fiber laser welding machine

First of all, it is important to note that when inspecting the internal or external connector terminals of the 1000w handheld fiber laser welding machine, the power input switch must be turned off before it can be implemented.

1. Perform regular inspections.
For example, check whether the rotation of the cooling fan is smooth when the 1000w hand-held fiber laser welding machine is energized, whether there is any abnormal movement of the cooling fan, whether the sound and odor are leaking, whether the joint of the welding wire and the insulation wrap are loose or peeling off the welding cable and each
Whether there is abnormal heat generation in the wiring part.

2. Because the 1000w handheld fiber laser welding machine is forced air-cooled, it is easy to inhale dust from the surrounding and accumulate in the machine.
Therefore, we can use clean and dry compressed air to blow away the dust inside the 1000w handheld fiber laser welding machine.
Especially the transformers, reactance coils, the gaps between the coils, and power semiconductors should be especially cleaned.

3. Regularly check the wiring position of the power wiring.
Check whether the terminal screws on the input side, output side and other terminals, as well as the wiring part of the external wiring, the wiring part of the internal wiring, etc. are loose, and when rusted, remove the rust to make the contact conductive.

4. Long-term use of 1000w hand-held fiber laser welding machine will inevitably cause the shell to be shaped due to contact, rust and damage, and internal parts will wear away. Therefore, the replacement of defective parts and the shell should be implemented during annual maintenance and inspection.
Comprehensive repair work such as repair and reinforcement of insulation deterioration parts.
The replacement of defective parts during maintenance is better enough to replace new products all at once to ensure the performance of the 1000w handheld fiber laser welding machine.

The regular maintenance and inspections implemented above can reduce the occurrence of welding failures. Although it takes some time and precision, it can extend the life of the 1000w hand-held fiber laser welding machine and increase the efficiency of the operation to ensure that the 1000w hand-held fiber
The performance and safety of the laser welding machine.
It is an important content that cannot be ignored in welding work.